DIY : How to?

Proces of changing housings consist from 3 steps

1

PREPARATION

prepare good working space

2

DISASSEMBLY

remove all parts from original housing

3

ASSEMBLEY

installing all parts into new HONU housing

 
 
 

DISASSEMBLY

STEP 1:


Unscrew the bottom bolts

STEP 2:


  1. with suction cap lift off screen just a little to get sprudger
  2. with sprudger disconnect dispay from housing, and try o minimum bending

STEP 3:


  1. unscrew 3 coloured screws and remove 2 protective plates
  2. disconnect the battery, with that you prevent any logicboard damage

STEP 4:


now you can safely disconnect the display

STEP 5:


unscrew all coloured bolts from logicboard and camera

STEP 6:


disconnect flat cables, and unwind the hidden screw bellow flat cable

STEP 7:


disconnect small cable

STEP 8:


unscrew upper screws that are on the vertical side of housing

STEP 9:


you can now easily remove logicboard out of the housing


note: you must be sure there is no simcard tray installed

STEP 10:


remove battery


note: you get new one in the package, so no need for extra coutuons

STEP 11:


untide 3 screws in top left corner to and remove vibrator


note: screws are coloured with red dots

STEP 12:


with sprudger now carefully remove flat cable that is connected on buttons


note: be VERY careful with this step, flat cable can easily be damaged, you will be forced to order new one, in case it damage

STEP 13:


with sprudger remove Wi-Fi antena

STEP 14:


untide all screws from bottom parts


note: be VERY careful with this step, flat cable can easily be damaged, you will be forced to order new one, in case it damage

STEP 15:


VERY IMPORTANT
remove flat cable connector from speaker like in the movie at 5:33, and then you can easily take out a speaker

STEP 16:


with spurger remove dock connector


NOTE: charging connector might give you some problems, just pull upright and it will detached itself from housing

Now proceed to final step 3. - assembly

click here

 
 
 

Join us:

subscribe for news:

 
 
 

Follow us